Unproblematic filtration for up to 6 working centres (CNC machines) with automatic, self-cleaning unit.
Microfil30-M4 is based on the same principles as an Accustrip Full Flow Central Plant. Fluids are filtered through stainless steel filter candles with a filtration fineness of 20-30 Micron. The filter candles are self-cleaning by means of a timer controlled back flushing; a small amount of emulsion and compressed air is directed into the filter candles, which performs a non-contact cleaning of the stainless steel filter candles. The small amount of emulsion from the back-flushing process is directed back to the band filter.
The stainless steel filters set to perform the back flush cleaning process with the appropriate time interval needed – depending on specific requirements. This process lasts approximately 20 seconds. During this time, the flow will be reduced, since the system is running on fewer filters.
- Connect up to 4-6 CNC machines
- 100 % Full flow filtration
- Full automatic filtration system
- Stainless steel unit incl, filter candle
- Fine filtration 20 -30 μm
- Guaranteed of filtering result
- Effective back flushing of filter
- Tank capacity 1075 – 1740 liter
- No pressure drop in the system
- Easy interface via harting plug
The system can be expanded with numerous components such as a high-pressure pump up to 150 bar, return pumps with level sensor, an oil separator, an extended tank, a chiller, and much more.
|Type||Fineness [µm]||Max. capacity [l/min]||Connection of machines||Clean tank capacity / Extended tank* [liter]||W [mm]||l [mm]||L total [mm]||h [mm] Extended tank*||Comp. air [bar]||Electricity: 50 Hz|